Request a project quote

Composite Panel and Rainscreen Cladding

A2-class panels, ceramic and HPL cladding

Composite Panel and Rainscreen Cladding

Fire-classified cladding systems on aluminium sub-frames for the opaque parts of the facade.

Priced per project

The non-glazed parts of a facade, slab edges and plant areas are usually clad with ventilated rainscreen systems. The air gap between the cladding and the insulation lets moisture escape and reduces heat build-up in summer.

Cladding materials

  • Mineral-core aluminium composite panels (fire class A2-s1,d0)
  • Solid aluminium sheet and perforated panels
  • Porcelain ceramic and fibre cement boards
  • High-pressure laminate (HPL) facade panels

Fire safety

Under Türkiye's fire protection regulation for buildings, the reaction-to-fire class of external cladding is decisive on high-rise buildings. We use materials classified to TS EN 13501-1 and install cavity fire barriers at every floor line.

Sub-frame

The aluminium sub-frame of L and T profiles is fixed to the wall with thermally isolated brackets that reduce thermal bridging. Stone wool boards are used as insulation.

Panel sizes, joint widths and concealed or visible fixing details are approved with the architect on sample panels, and colour batches are ordered in one go to avoid shade differences.

Scope of service

  • A2-s1,d0 panels
  • Cavity fire barriers
  • Isolated brackets
  • Stone wool insulation

Composite Panel and Rainscreen Cladding — get a quote

Fill in the form and we will get back to you as soon as possible.

Frequently asked questions

How do you choose between a stick and a unitised facade?
Building height, programme and site conditions decide. For buildings under 10 storeys with a flexible programme, a stick facade is economical. For 15 storeys or more, fast-track projects or city sites where scaffolding is impractical, a unitised facade offers an overall cost advantage.
Does thermally broken aluminium insulate as well as PVC?
The W80 HI series, with a wide polyamide break and foam fill, reaches Uf 1.4 W/m²K, close to a good PVC series. Aluminium's advantage is that it delivers this with much slimmer profiles and far larger sash sizes.
What do you need to prepare a quote?
Architectural floor plans, elevations and system sections (DWG or PDF), plus any specification and bill of quantities, are enough. You can upload your files through the project quote form, and we send a system proposal and budget range within five working days.
Why does pricing vary from project to project?
Glass type and size, profile sections driven by wind load, colour and finish, anchor conditions, building height and access method all affect cost directly. As aluminium and glass prices follow exchange rates, quotes are valid for 30 days.
Is a mock-up test needed on every project?
No. Test reports exist for our standard systems. But on tall buildings, bespoke details or where the specification requires it, we recommend a full-scale mock-up test. Its cost and duration are shown separately in the quote.
Request a project quote